Panasonic KX-P3123 - Manual (Page 92)

Paper Specifications
Paper which may be used with this unit must be within the specifications provided below.
Fanfold Paper
Width: 4 - 1 0 inches (102 - 254 mm)
Quality and number of sheets:
Type of paper Sheets
Weight
lbs g/m^
push pull push pull
Fine-quality
paper
1 16 - 24 1 6 - 2 2 6 0 - 9 0 60 - 82.5
Non-carbon 2-4 11 - 14 (17* *) 41 -53 (64*)
Multi-layered
with carbon
2 11 - 14 (17*) 41 - 53 (64*)
(* only for the last sheet)
Note:
I • When using multi-part fanfold paper especially in environments that have very high or low
temperature and/or humidity, we recommend the use of the bottom feed pull mode to optimize paper
I handling and print quality.
i • To insure optimum print quality, 16 - 22 lbs (60 - 82.5 g/m^) is recommended for graphic printing.
• In multi-layered paper with carbon, the carbon is equivalent to a sheet of paper.
• “Weight in pounds” represents the weight of 500 [17x22 inches (432x559 mm)] sheets.
• The printer will handle multipart papers up to 0.013 inch (0.32 mm) thick. Up to 4 copies of 14 lb.
chemical release paper can be used.
• Multipartformsconsistingof 2 parts may be used for rear feeding (Push mode). For 3 or 4 part forms,
we recommend bottom feeding for optimum print quality.
Single Sheets
Width: 4 - 11.7 inches (102 - 297 mm)
Height: 5 - 14.3 inches (127 - 363 mm)
Weight in pounds (g/m^): 1 4 - 2 4 l b s ( 5 3 - 9 0 g / m ^ )
Note:
Paper should be within operating temperature and humidity ranges at least 24 hours prior to use.
Envelopes
#6 and #10 size envelopes are recommended. Since envelopes vary in size, paper weight and
construction, we cannot guarantee print quality and paper handling for all types of envelopes.
Note:
• To optimize print quality, printing should not occur in areas where the edges overlap.
92