Kx-p1150, 8 control panel – Panasonic KX-P1150 User Manual
Page 33
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
KX-P1150
The control panel is composed of 5 switches and 4 LEDs.
(1) The ON LINE switch, switches between on-line and off-line and is input to IC200 (pin @). This switch is
also used to change the current setting in the initial setup mode.
(2) The LF/FF switch is for one-line or one page-feed paper feed and is input to IC200 (pin @)).
(3) The Font switch selects the character fonts and is input to the CPU (pin @ ). This switch is also used to
select the item in the initial setup mode.
(4) The TEAR OFF switch enables paper feeding to the tear off position and is input to the CPU (pin @ ).
(5) The LOAD PARK switch enables automatic loading and feeding back of the fanfold paper and is input to
the CPU (pin @ ).
(
6
) The power/paper out LED lights when power is turned on and blinks when paper out is detected.
(7) The ON LINE LED lights when at the on-line status.
(
8
) Two Font LEDs display Font Type.
8.2.8 Control Panel
I C 2 0 0
CPU
AN0
AN1
AN3
P70 (Ml 01
P71 (Mil)
P72 (Ml 2)
P73 (M13)
b
U
R245.
Tw:
R247'
RA214.-:^
L
JT
CN204
E
8
7
l
3
7
S
1
CN500
L
X“
R300
-V*i—
ON LINE
0302
R303
---- N
t
---- ^
V
D300 FONT
—nr-
0301
D303 POWER R302
R301
-w»—
'8300
,
n
S)
q
301
----
,, Vd^Q302
FONT
TEAR
OFF
LF/FF
LOAD
PARK
0N
LINE
f—O O—-I
SW300
p-O
SW302
rC O—J
SV303
-O 0—1
SW304