Panasonic KX-P1150 - Manual (Page 2)

KX-P1150
1. Specifications
Power requirements: AC220-240V, 50/60Hz
Current: Idle: 0.1A; Maximum 0.7A
Power consumption: Max ------60 W
Standby
5W
Self Test ----- 35 W
Interface: Centronics parallel
Print mode: Draft, Near Letter Quality (Courier, Bold PS, Times Roman, Sans Serif)
Character sets: 96 ASCII characters, 33 International characters (14 countries + LEGAL Set no
science), 158 IBM-PC special characters, 38 Multilingual characters
Buffer: 4K (standard), additional 32K (optional KX-P44)
Dot configuration: Dot Diameter: 1/84 inch (0.3mm)
Draft NLQ
Dot Alignment (HxV) 9x9 18x18
Dot Pitch
(H) 1/120" 1/240"
(V) 1/72" 1/144"
Character size
Normal characters:
0.074(W)
X
0.097(H) inch (1.89 x 2.46 mm)
Character per line (cpI)
(per inch (25.4mm) (cpi)):
Draft, LQ Elongated
Pica 80 cpi (lOcpi) 40 cpi (5cpi)
Elite 96 cpi (12cpi) 48 cpi (6cpi)
Micron 120 cpi (15cpi) 60 cpi (7.5cpi)
Compressed 137 cpi (17cpi) 68 cpi (8.5cpi)
Elite compressed 160 cpi (20cpi) 80 cpi (lOcpi)
Print speed:
Micron Elite Pica
Draft 240 cps 192 cps 160 cps
Letter Quality 32 cps 38 cps 32 cps
Print direction: Text printing: Bi-Directional
Bit Image printing: Uni-Directional & Bi-Directional
New line time: Approx. 100 msec [with 1/6 inch (4.2 mm) line feeding]
Paper feed: Friction and Push Tractor
Paper used:
Width Weight Height
Fanfold paper 4-10 in
(102-254mm1
16-24lbs.
Single sheet
4-11.7 in
(102-297mm)
14-24 lbs.
5-14.3 in
(127-363mm)
Envelopes Standard business envelopes ie: #6, #10 size
Paper thickness: Total thickness of sheets must be less than 0.013 inch (0.32 mm).
Number of copies: Original -(- 3 non-carbon copies
Printer emulation: EPSON
IBM FX-850
Proprinter 111