Panasonic KX-P1150 - Manual (Page 11)

KX-P1150
abnormal
5.2 Print Timing
This adjustment is used for adjusting the print timing.
There are 6 different speeds at which the print timing
can be adjusted.
The print timing is adjusted using the following
procedure:
1. Turn on the power while holding the ON LINE
and LF/FF switches.
H H H
normal
2. Press the FONT switch to print the "H" pattern.
The "H" pattern will be printed for 4 full lines.
3. Check the print timing comparing the "H" pattern
from line to line.
4. If the print timing is misaligned, adjust it by using
the LF/FF (Move to right) and ON LINE (Move to
left) switches and retry the printing for a final
check.
Note: Pressing the LF/FF or ON LINE switch moves
the line in 1/1440 inch increments.
5. Press the TEAR OFF switch to select the next
print speed.
6. Repeat steps 2-4 for each print speed.
7. Press the LOAD/PARK switch to save the print
timing in memory. The printer will return to the
normal print mode.
Note: If the second line of the "H" pattern is shifted
by more than half of an "H" character, be sure
the printing mechanism is normal before
starting adjustment.