Yamaha SPX90 II User Manual
Yamaha
Table of contents
Document Outline
- YAMAHA
- PRECAUTIONS
- FRONT PANEL
- REAR PANEL
- BASIC OPERATIONS
- UTILITY FUNCTIONS
- DESCRIPTION OF PROGRAMS AND PARAMETERS
- REVERBERATION TIME (R/T). Range: 0.3 ~99.0 sec
- 1. TYPE. Range: HALL, RANDOM. REVERSE, PLATE
- 2. ROOM SIZE. Range: 0.1 ~ 20.0
- 3. LIVENESS. Range: 0 ~10
- 4. DELAY. Range: 0.1 ~ 1800.0 msec
- 5. LPF. Range: 1.0 kHz ~ 11 kHz, THRU
- 1. LEFT CHANNEL DELAY TIME. Range: 0.1 ~
- 2. LEFT CHANNEL FEEDBACK GAIN. Range:
- 3. RIGHT CHANNEL DELAY TIME. Range: 0.1 ~ 2000.0 msec
- 4. RIGHT CHANNEL FEEDBACK GAIN. Range:
- 5. HIGH (FEEDBACK HIGH).Range: 0.1 ~ 1.0
- 1. LEFT CHANNEL DELAY TIME. Range: 0.1 ~
- 2. LEFT CHANNEL FEEDBACK GAIN. Range:
- 3. RIGHT CHANNEL DELAY TIME. Range: 0.1 ~ 1000.0 msec
- 4. RIGHT CHANNEL FEEDBACK GAIN. Range: -99% ~ +99%
- 5. HIGH (FEEDBACK HIGH). Range: 0.1 ~ 1.0
- MODULATION
- PITCH CHANGE
- FREEZE
- 1. REC. MODE Selection. Range: Manual, Auto
- 2. TRIGGER DELAY. Range: -2000 ~ 2000msec.
- 3. RECORDING
- TRIGGERING
- • MANUAL Mode
- • AUTO Mode
- 4. OVERDUB Recording
- • FREEZE operation
- -MANUAL Mode only-
- PLAY
- 5. PLAYBACK
- 6. TRIGGER MASK (FREEZE A). Range:
- 10-2000.0 ms.
- ADR-NOISE GATE
- 1. REVERB TIME (R/T). Range: 0.3 ~ 99.0 sec
- 2. HIGH (High Frequency Reverb Time Ratio). Range: 0.1 ~ 1.0
- 3. DELAY. Range: 0.1 ~ 1000.0 msec
- 4. HPF (High Pass Filter). Range: 32 Hz ~ 1.0 kHz, THRU
- 5. LPF (Low Pass Filter). Range: 1.0 kHz ~ 11 kHz, THRU
- 6. TRIGGER LEVEL. Range: 0 ~ 100%
- 7. HOLD TIME. Range: 1 ~ 30,000 msec
- 8. RELEASE TIME. Range: 5 ~ 32,000 msec
- 9. MIDI TRIGGER. Range: ON, OFF
- TRIGGER LEVEL. Range: 1 ~ 100%
- 2. TRIGGER DELAY. Range: -100 100 msec
- 3. TRIGGER MASK. Range: 5 ~ 32,000 msec
- 4. ATTACK TIME. Range: 5 msec ~ 32,000 msec
- 5. DECAY TIME. Range: 5 msec ~ 32,000 msec
- 6. DECAY LEVEL. Range: 0 ~ 100%
- COMPRESSOR
- 7. HOLD TIME. Range: 1 msec ~ 30,000 msec
- RELEASE TIME. Range: 5 msec ~ 32,000 msec
- 9. MIDI TRIGGER. Range: ON, OFF
- 1. TRIGGER LEVEL. Range: 1 ~ 100%
- 2. TRIGGER DELAY. Range: -100 ~ 100 msec
- 4. ATTACK TIME. Range: 5 msec ~ 32,000 msec
- HOLD TIME. Range: 1 msec ~ 30,000 msec
- HOLD LEVEL. Range: 0 ~ 100%
- RELEASE TIME. Range: 5 msec ~ 32,000 msec
- 8. MIDI TRIGGER. Range: ON, OFF
- TRIGGERED PAN
- 1. PAN SPEED. Range: 0.1
- 40.0 Hz
- 2. DIRECTION. Range: L -> R, L
- R. L-
- 3. DEPTH. Range: 0 -100%
- 1. TRIGGER LEVEL. Range: 1 - 100%
- 2. TRIGGER DELAY. Range: -100 - 100 msec
- 3. TRIGGER MASK. Range: 5 - 32,000 msec
- 4. ATTACK TIME. Range; 5 msec - 32,000 msec
- 5. PANNING TIME. Range: 5 msec - 32,000 msec
- 6. RELEASE TIME. Range: 5 msec - 32,000 msec
- 7. DIRECTION. Range: L -R, L ^R
- 8. LPF. Range: 1.0 kHz - 11 kHz, THRU
- 9. DELAY. Range: 0.1 - 1800.0 msec
- 1. TRIGGER LEVEL. Range: 1 ~ 100%
- 2. VIBRATO DELAY. Range: 1 ~ 30,000 msec
- 3. VIBRATO RISE TIME. Range: 5 msec ~ 32,000 msec
- 4. VIBRATO FREQUENCY. Range: 0.1 ~ 20.0 Hz
- 5. VIBRATO DEPTH. Range: 0 -100%
- 6. MIDI TRIGGER. Range: ON, OFF
- 1. HPF. Range: THRU, 32 Hz ~ 1.0 kHz
- 2. MID FRO. Range: 315 Hz - 4.0 kHz
- 3. MID GAIN. Range:-15 - +15 dB
- 4. MID Q. Range: 0.5 ~ 5.0
- 5. HI FRO. Range: 800 Hz ~ 8.0 kHz
- 6. HI GAIN. Range: -15 ~ +15 dB
- 7. HI Q. Range: 0.5 ~ 5.0
- 8. LPF. Range: 1.0 kHz ~ 11 kHz, THRU
- 9. DELAY. Range: 0.1 ~ 1800.0 msec
- SAMPLE APPLICATIONS
- SPECIFICATIONS
- MIDI DATA FORMAT
- ROM CONTENTS AND CONTROLABLE PARAMETERS
- EARLY REFLECTION MODE CHART
- BLOCK DIAGRAM
- DIMENSIONS
- USER PROGRAMMING TABLE
- c
- PRECAUTIONS
- • VOLTAGE
- • TEMPERATURE ENVIRONNANTE
- • NETTOYAGE DE L'EXTERIEUR
- MESSAGES D'ERREUR
- Précautions à prendre lors de la manipulation du Matériel de Sonorisation
- STOCKER: SAUVEGARDER LES PRO- l GRAMMES EDITES
- PROGRAMMER LA BALANCE ET LE N1-
- I VEAU DE SORTIE
- BYPASS (Dérivation)
- FONCTIONS MIDI
- EDIT TITLE
- SPECIFICATION DES MEMOIRES QUI POURRONT ETRE RAPPELEES AU MOYEN DE LA COMMANDE AU PIED
- MODULATION
- I
- Remarque:
- 1. Sélection du mode REC. Options; Manuel, Auto
- 2. TRIGGER DELAY (Retard de déclenchement). Plage de réglage: -2000,0 2000,0
- msec.
- 3. ENREGISTREMENT
- DECLENCHEMENT
- Mode MANUEL
- Mode AUTO
- Enregistrement avec surdoublage (OVER- DUBBING)
- REPRODUCTION
- 6. TRIGGER MASK (FREEZE A).
- PARAMETRIC EQ
- FORMAT DES DONNEES MIDI
- PRECAUTIONS
- c
- VORSICHTSMASSNAHMEN
- VORDERSEITE
- RÜCKSEITE
- BASISOPERATIONEN
- GEBRAUCHSFUNKTIONEN
- BESCHREIBUNG DER PROGRAMME UND PARAMETER
- 1. HALLDAUER (R/T) Bereich: 0,3-99,0 Sek
- 2. HOCHFREQUENZHALLDAUER (HIGH)
- 3. VERZÖGERUNG (DELAY), Bereich: 0,1 -
- 4. HPF (HOCHPASSFILTER), Frequenzgang: THRU (durch), 31 Hz - 1,0 kHz
- 5. LPF (TIEFPASSFILTER) Frequenzgang: 1,0 kHz - 10 kHz, THRU
- 1. TYP: HALL, RANDOM, REVERSE, PLATE
- 2. RAUMABMESSUNGEN (ROOM SIZE), Bereich: 0,1 - 10,0
- 3. LEBENDIGKEIT (LIVENESS), Bereich 0-10
- 4. VERZÖGERUNG (DELAY): 0,1-1800,0 mSek
- 5. LPF-Einstellbereich: 1,0 kHz - 10 kHz, THRU
- VERZÖGERUNG (DELAY)
- MODULATION
- TONHÖHENÄNDERUNG
- EINFRIEREN
- NACHHALL UND KENNSCHALTUNG
- PARAMETRISCHER EQUALIZER
- 1. AUSLÖSERi»EGEL Bereich:!-100%
- 2. VIBRATOVERZÖGERUNG, Bereich:0~30000 mSek
- 3. VIBRATOEINSCHWINGZEIT, Bereich: 5
- 4. VIBRATOGESCHWINDIGKEIT, Bereich: 0,1-20,0 Hz
- 6. MIDI SCHALTIMPULS, Varianten: An/Aus
- HPF, Frequenzgang: DURCH, 32 Hz-1 kHz
- MITTEN (MID FRQ), Frequenzgang: 315 Hz - 4,0 kHz
- PEGEL DER MITTEN (MID GAIN), Bereich: -15-+15dB
- 4. MITTEN-Q (MID Q), Bereich: 0,5-5,0
- 5. HÖHEN (Hl FRQ), Frequenzgang: 800 Hz -
- 8,0 kHz
- 6. PEGEL DER HÖHEN, Bereich: -15 - +15dB
- 7. HÖHEN-Q
- 8. LPF, Frequenzgang: 1,0 kHz-11 kHz, DURCH
- 9. VERZÖGERUNG, Bereich: 0,1-1800,0 mSek
- ANWENDUNGSBEISPIELE
- TECHNISCHE DATEN
- MIDI DATENFORMAT
- ROM-INHALT UND REGELBARE PARAMETER
- FRUHREFLEXIONSTABELLE
- BLOCKDIAGRAMM
- ABMESSUNGEN
- BENUTZER-PROGRAMMIERUBERSICHT
- YAMAHA