Triggering, Manual mode, Auto mode – Yamaha SPX90 II User Manual
Page 16: Overdub recording, Freeze operation, Manual mode only, Play, Freeze a rec. ready, Rec m0de= manual, Freeze a record
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TRIGGERING
• MANUAL Mode
To actually begin recording if the MANUAL mode
has been selected, press the PARAMETER IN
CREMENT key. The SPX90II will record for 2000
milliseconds. Also the optional foot switch FC-5
can
be
used.
Connect
the
FC-5
to
the
MEMORY/TRIGGER Foot Switch jack and press
the FOOT TRIGGER key . Then the FC-5 works
as the trigger switch when it is pressed.
• AUTO Mode
If the AUTO mode has been selected, the
SPX90II will automatically begin recording when
an input signal of sufficient level is detected. The
LCD displays "TRIGGER!" when the freeze function
is triggered. When the recording begins the LCD
displays The freeze (recording) ends auto
matically after 2000msec and the display says "OK".
4. OVERDUB Recording
To "overdub," or record new material without
erasing the previously recorded material, use the
following procedure.
1. Press the PARAMETER key until the OVERDUB
display appears.
2. Press the PARAMETER DECREMENT key. This
sets the record ready status, and recording will begin
as soon as a trigger signal is received.
• FREEZE operation
FREEZE A
REC. READY
-MANUAL Mode only-
Al
V
FREEZE A
TRIGGER!
FREEZE A
FREEZE A
OK
FREEZE A
REC M0DE= xxxxxx
'
1701717717 A
REC M0DE= MANUAL
1
FREEZE A
RECORD
'
'
PLAY
To begin recording again, press
the parameter decrement key to enter
the Rec Ready Mode.
CD
A
PARAM
ETER
-or AUTO
C3
A
ETER
15