Yamaha SPX90 II - Manual (Page 8)

1
OUTPUT BALANCE AND LEVEL PRO­
GRAMMING
The BALANCE key selects the BALANCE and OUT­
PUT LEVEL functions for all programs.
1. Press the BALANCE key while any parameter is
selected. _ '
2. The first function called will be BALANCE. Adjust
the BALANCE of the effected and direct signal
between 0 and 100% using the PARAMETER
INCREMENT/DECREMENT keys.
* Balance = 100% : effect sound only.
Balance = 0% ; direct sound only.
3. Press the BALANCE key again to call the OUTPUT
LEVEL function. Adjust using the PARAMETER
INCREMENT/DECREMENT keys.
* OUT LVT = 100% : maximum output level.
OUT LVL = 0 % : no sound will be output.
/ BYPASS
When the BYPASS key is pressed and its LED lights,
the effect signal is defeated and only the direct input
signal is delivered via the OUTPUT jacks. The BAL­
ANCE and OUTPUT LEVEL functions are also by­
passed. The BYPASS function can also be activated
via a a footswitch connected to the BYPASS jack. A
normally-closed-type footswitch such as the Yamaha
FC-5 must be used.
REV 3 VOCAL
BALANCE = 50 7„
' <
REV 3 VOCAL
OUT LVL = 100 7o
REV 3 VOCAL
OUT LVL = 90 7o
a
A