Cleaning the printer, E)^rnal, Turn the power off – Panasonic KX-P6500 User Manual
Page 54: Caution, Cautions, 5 care and maintenance, Chapter, Internal
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Chapter
5 Care and Maintenance
Cleaning the Printer
Periodic cleaning of the printer is recommended. The frequency of cleaning is dependent upon the environment in
which the printer is used. You should clean the printer:
• at least once a month,
• when you install a new Process Unit.
• when print quality has deteriorated.
E)^rnal ______ ___
^ Turn the power OFF.
2
Clean the cover with a soft cloth.
Use any mild commercial cleaner.
Caution:
•
Do
not
use
benzine,
thinner,
aerosol
cleaners,
or
any
abrasive
powder
to
clean the cabinet.
Internal
1
n
Turn the power OFF, open the left cover and
remove the Process Unit.
Before cleaning the inside of the printer, allow
the fuser to cool (about 5 minutes).
Cautions:
•
The printer must be turned OFF prior to
cleaning.
•
Do not expose the Process Unit to light
for more than 5 minutes, or to direct
sunlight.
•
Do not touch the green drum surface of
the Process Unit.
Clean the following areas with a dry cloth or
a cotton swab.
With a dry cloth
• Pinch roller
• Feed roller
• Transfer roller
• Paper chute (Paper dust)
With a cotton swab
•
Carefully wipe the tungsten wire and the laser
unit mirror by sliding a cotton swab from end
to end 4 to 5 times.
2 Close the left cover.
Laser unit mirror
54