Panasonic KX-P6500 - Manual (Page 15)

Setup
Loading Paper/Envelopes (Labels, Transparencies)
Loading Paper
This printer has a multi-purpose paper tray. The paper size selected through the GDI Mode ( P. 34) or PCL Mode
( P. 41) and your software application should also match the size of the paper in the paper tray for proper print
alignment.
1 O
Open the output tray (top cover).
@ Extend the paper support by sliding it
upward.
2 Open the paper tray.
Separate the paper guides to the approxi­
mate width of your paper.
Refer to the size indicators above the paper
guides for accurate paper width.
Fan the stack of paper and tap it on a level
surface to avoid paper jams or skewed print­
ing.
Note:
• You may load up to 100 sheets of
75g/m2 (20 lbs.) paper in the paper tray.
Place the paper in the paper tray properly
and adjust the paper guides to your paper
size.
The height of paper should not exceed the limit
mark on the paper guide, or it may cause a paper
jam.
O
o
3
3
Q
o
5'
(Q
0)
-tJ
O
€
(D
o
3
o
&}
9:
5’
(O
■0
fi>
■D
15