Panasonic KX-P6500 - Manual (Page 20)

Using the Printer in Windows
Installing the KX-P6500 for Workgroups Software
The KX-P6500 for Workgroups software installation analyzes your system configuration, installs the software, and
makes the necessary changes to Windows startup files. Installation can be performed from the installation disks, the
Windows for Workgroups or Windows 95 network. Once a Server has installed the KX-P6500 for Workgroups software
on the Server PC, Clients can install Client software on the Client PC from disk #1 and then from across the network.
This instailation proceeds faster than disk installation.
The KX-P6500 for Workgroups software installations will create and let you use the following.
• KX-P6500 Console { P. 27) in the KX-P6500 Tools window
—includes printer drivers for Windows 3.1 and Windows for Workgroups 3.11, or printer drivers for Windows 95
—enables you to setup the printer in Windows
• KX-P6500 Control Panel { cw P. 44)
—enables you to setup the printer in MS-DOS
Notes:
• If you wish to discontinue installing the software during installation, first complete the installation procedure,
then use the Uninstall Utility to remove ( P. 24).
• Printer driver disks 2 of 4, 3 of 4 and 4 of 4 are the same and used for both Windows 95 and Windows 3.1.
r
Installing the Windows 3.1 Printer Driver & Utilities
^ To start Windows in the 386 Enhanced Mode,
type WIN at the DOS prompt and press
[ Enter] .
Insert the Windows 3.1 Printer Driver &
Utilities disk 1 of 4 (#1) into disk drive A.
From the Program Manager, click “File’
Then click the “Run...” option.
A At the prompt, type A:\SETUP and click
5 b
5
a
If you are installing the software on a
server/personal, click I Printer OTj.
If you are installing the software on a client,
click t No Printer I.
0 The Setup Program has determined the fol­
lowing user configuration. If necessary,
make any changes to this window.
eanasonicIK'XEBSSOO ©gag
The setup program has determined the following user
configuration for your KXP6500 installation. Make
any necessary changes and press [Continue].
Max. 15 characters are available for computer name.
User Type;
Computer Name:
Comments:
Personal
CUMPAU UF017
KX-P6500 Directory:
HOST Directory:
C:\KXP6500
C:\P6500CPS
Continue Quit Help
• UserType: Select personal. Client or Server depend­
ing on your computer configuration.
• Computer Name: Type in the name of the computer
network or computer name, up to 15 characters, in the
Computer Name field.
• Comments: Type in any comments in the comments
field. For instance, software version No. or your name,
etc.
• KX-P6500 Directory: If you wish to install the KX-
P6500 for Workgroups software for Windows on an­
other drive and/or directory, type the letter of the drive
and/or directory name in the KX-P6500 Directory field.
20