Preparation, Printer stands installation, Important – Panasonic KX-P6500 User Manual
Page 13: Open the plastic bag and remove the process unit, 2 setup, Chapter
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Chapter
2 Setup
Preparation
Printer Stands Installation
Important;
To
prevent
any
damage
to
the
Process
Unit,
observe the following precautions.
• Do not touch the green drum surface. Lift the
Process Unit by holding the green labeled tabs.
• Do not expose the Process Unit to light for more
than 5 minutes, or to direct sunlight.
• Do not keep the Process Unit near dust or dirt.
• Do not place the Process Unit in a high humidity
area.
1
Open the left cover by gently pulling the
cover release tab.
2 Remove the Process Unit by grasping the
green labeled tabs and pulling it toward you.
Open the plastic bag and remove the
Process Unit.
0 Remove the protective sheet.
@ Remove the tapes.
2 Install the Process Unit by grasping the
green labeled tabs and pushing it firmly into
the printer.
3
(D
CO
0)
3
a
en
D)
3
a
T3
o
o
(D
CO
CO
C
3
rt»
3
CO
SL
5T
5*
3