One-touch editing – Panasonic SC-CH84M User Manual
Page 31
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

One-touch editing
1
2
3
4
DECK 2
DOLBY Nfl
DISC SKIP/
GROUP NAME
Press A OPEN on deck 2, and
then insert the tape.
Close the holder.
When making a Dolby NR re
cording, press DOLBY NR so
that the Dolby NR indicator
lights.
Press CD.
Press DISC SKIP/GROUP
NAME to select the disc you
want to record.
'
^— Press ► and check play starts
*
I
....... >
^
and which disc is being re-
/rUNir^MBj \ FMWOPM
p
V
corded.
After checking, press ■ and stop play.
To stop editing
Press ■.
The CD changer also stops.
One-touch editing operation
1. The cassette deck wilt rewind the tape, and then advance the tape
beyond the leader tape while making the non-recorded passage
of about 10 seconds.
2. The recording on side A starts.
3. If the last track on side A has not yet finished recording, that track
will automaticaily be recorded again from the beginning of side B.
4. Depending on the iength of the tape, the last track on side B may
be cut off in the middle,
When one-touch editing finishes
•The disc and track Nos. last recorded will remain on the display.
• If there is another CD to record, “LINK" will flash on the display and
the stereo will automatically start recording the next CD,
• If there isn't another CD to record, “LINK" will still flash on the
display, but the stereo will go on standby. To continue recording,
select a disc and press >■.
To quit linking, press ■.
To record programmed tracks
® Perform steps 1 -3, and then press PROGRAM on the remote
control.
@ Press DISC on the remote control.
@ Select the disc from the remote control wKh the numeric buttons.
@ Select the track number from the remote control with the numeric
buttons.
® Repeat steps until programming all tracks (max. 24 tracks).
® Perform above steps 5-6.
CD EPrr
Press CD EDIT to start re
cording.
The deck starts rewinding the tape,
it takes a little while after the button is
pressed for the recording to actually start.
31