Sequential play – Panasonic SC-CH84M User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Sequential play
The changer plays all the tracks on all the discs in order and stops
autOfTiatically when the fast track on the last disc finishes playing.
GROUP FILE buttons A-F
Press CD.
The power will come on automatically,
even if the stereo is on standby.
While the changer checks which slots
have CDs and which don’t, you will hear
the internal mechanism working. In the
meantime, “SEARCH” will flash on the
display.
Press
MODE
to
select
“BLOCK”.
Each time you press the button, "BLOCK”
and “GROUP" will appear alternately.
DISC SKIP/
GROUP NAME
Press
either
DISC
SKIP/
GROUP NAME (
a
or v ) until
you reach the desired disc.
A: Skips forward to next disc,
v; Skips backwards to the preceding
disc.
4
Press
Play witi begin.
Disc number of
Indicates another
dlsc(s) will follow.
Track number
Disc number of next
disc
Elapsed playing time
(Current disc number)
The changer will play all CDs up through
the one before the CD you started with,
and it will stop automatically after playing
the last track on it.
VOLUME
Turn VOLUME to adjust the
volume as you like.
To temporarily stop play
To stop play
Press II.
Press
>■
to resume play.
Press ■.
The display will show the total number of
tracks and the total playing time of the
current disc.
Total number of
Current disc
mxt j
e >
'■3D
Total playing time
The total playing time displayed includes
the silent sections between tracks. For
this reason, it may be a few seconds
longer than the playing time indicated on
the disc.
When you open the rack panel, tfie total
number of tracks and the total playing
time go out.
Press
>
to redstart play.
Outside light or noise may sometimes cause the changer to detect a
disc when there isn’t one. However, the changer always correctly
detects the disc when in the play mode no matter what.
When “ appears on the display
It indicates there are 16 or more tracks on the disc at the playing
position.
When “NO DISC” appears on the display
It indicates there is no disc set in the slot.
For your reference
If you leave the front panel open while a disc is in play, when the disc
is over, the changer will stop.
Convenient way to use the GROUP FILE buttons
A-F
The changer automatically divides the CD rack up into 6 blocks as
shown below.
DISC SLOT
1-10
11-20 21-30 31-40 41-50 51-60
BLOCK
A
B
c
D
E
F
One way to organize yourself would be to arrange the blocks by band
or solo artist. Within each block, you could then set the discs in
chronological order from the earliest you have until the band’s
(artist's) most recent, in sequential play, discs will be played in the
set order.
13