Panasonic SC-CH84M - Manual (Page 10)

Memory presetting
»If broadcast frequencies are preset in the memory, you can easily
tune in any of these frequencies from the system or remote control
unit.
»Up to 12 stations can each be set in the FM. LW and MW bands
(For Australia and N.Z; FM and AM bands) with the automatic or
manual memory presetting.
Automatic memory presetting
This example in the figure shows how to preset stations in the FM
band.
BAND
%
(For United Kingdom)
Press TUNER BAND to select
“FM", “LW”or “MW".
(For Australia and N.Z.)
Press TUNER BAND to select
“FM” or “AM”.
The power wiii come on automatically,
even if the stereo is on standby.
/ □ \
Press TUNING MODE to select
“MANUAL”.
Each time you press the button,
“MANUAL" and “PRESET’ will appear al­
ternately.
V-TUKINOrriME ADJUST ^
Press V or A until the display
shows the frequency from
which you want to begin auto­
matic memory presetting.
Holding the button down will scroll the
frequency. Repeatedly tapping on it will
change the frequency one step with
every touch.
While scrolling, if the radio picks up a
station, it will automatically tune it in (auto
tuning).
Press and hold MEMORY/SET.
Release ttie button when the frequency
display begins to change.
The unit will automatically memorize the
received broadcast frequencies in se­
quence.
10
The moment the frequency Is memorized
The station and channel will be displayed for about 1 second.
Channel
-»EIB.
D. 1 OiBP*
- ^re-
Station
When auto memorization Is complete
The last station to be memorized will be left on the display.
To confirm the preset stations:
1. Press TUNING MODE to select “PRESET.
2, Press
V or A .
Auto memory presetting does not work when radio waves from the
broadcasting station are too strong or too weak.
In such case, carry out presetting manually. (See below.)
Manual memory presetting
(After step 2)
1. Press V or A to select the desired frequency, and press
“MEMORY/SET. (“MEMO" flashes.)
2. Press V or A to select the preset channel, and then press
“MEMORY/SET during “MEMO” flashes.
“MEMO” indicator goes off.
Memory retention
The contents of the memory will continue to be stored for approxi­
mately 2 weeks, even if the power supply cord is disconnected.