Panasonic DVD-L50PM - Manual (Page 53)

others
Symptom Remedy
Reference
page
During playback of a
CD, the GUI screen
do not appear
automatically.
®lf play is stopped after the GUI screen have
been cleared from the screen, the GUI screen
will not appear automatically when play is re­
sumed.
25
No On-Screen
Display.
•The “Off setting is selected for “1 On-Screen
Messages” in “4 On-Screen Messages”; select
“On”.
37
Shock-proof function
(for preventing jumps
in the sound during
CD play) fails to
work.
•Shock-proof function does not work when the
optical digital audio cable is connected to the
audio input/output (optical digital audio output)
connector of the player’s left-side pane!.
When an error or trouble is detected during operation, a service number appears on the
screen.
When a service number appears, check out the details given below.
C I
Service number j Player status
A
Remedy
U11
•Disc is dirty.
A
•Wipe the disc clean. ^
r
HDQ
n □ stands
for a number.
V _______________
•Trouble is likely to have
occurred. The number fol­
lowing “H” depends on the
status of the player.
• Press and hold STOP (□) to set^
the player to the standby mode
and then back to ON. Alternatively,
press and hold STOP (□) to set
the player to the standby mode,
disconnect the AC adaptor, and
then re-connect it.
_________________ _________________ /
'If the service number fails to clear even when the remedial action is taken, ask a service
technician to repair the player.
The following symptoms may be found during play or during charging
of the battery pack: these are normal.
•The player or AC adaptor heats up during use.
•When the battery pack is detached and then re-attached during charging, the
CHARGE (CHG) indicator goes off for an instant.
•Transmission noises are heard inside the AC adaptor during charging.
♦The battery pack heats up after charging or during use.