Panasonic KX-F2781NZ - Manual (Page 79)

Specifications
1. Applicable Lines:
2. Document Size:
3. Effective Scanning Width:
4. Printing Paper Size:
5. Effective Printing Width:
6. Transmission Time*:
7. Scanning Density:
8. Halftone Level:
9. Scanner Type:
10. Printer Type:
11. Data Compression System:
12. Modem Speed:
13. Operating Environment:
14. Dimensions (HxWxD):
15. Mass (Weight):
16. Power Consumption:
17. Power Supply:
18. Memory Capacity**;
Public Switched Telephone Network
Max. 216 mm (8V2") in width
Max. 600 mm {23W) in length
208 mm (8^16")
216 mm
X
max. 50 m {8V2"x164') roll
208 mm (8^/1 e")
Approx. 15 s/page {Original mode)
Approx. 30 s/page (G3 Norma! mode)
Horizontal: 8 pels/mm (203 pels/inch)
Vertical: 3.85 lines/mm (98 lines/inch)—Standard mode
7.7 lines/mm (196 lines/inch)—Fine/Halftone mode
15.4 lines/mm (392 lines/inch)—Superfine mode
64-leve!
CCD image sensor
Thermal printing
Modified Huffman (MH), Modified READ (MR)
9600/7200/4800/2400 bps; Automatic Fallback
5-35 "C (41-95 °F), 45-85 % RH (Relative Humidity)
118 X 351 X 265 mm (42y32"xl3’3/i6"xl0yi6")
Approx. 3.7 kg (8.2 lb.)
Standby: Approx. 3.5 W
Transmission: Approx. 16 W
Reception: Approx. 28 W
Copy: Approx. 40 W
Maximum: Approx. 120 W
220-240 V AC, 50/60 Hz
Approx. 18 minutes of recording time including the greeting message,
when no fax documents are in memory. Recording time may be
reduced by caller side background noise.
OR
Approx. 13 pages of document memory based on CCITT No. 1 Test
Chari in standard resolution, when no voice messages have been
recorded.
^Transmission speed depends upon the contents of the
pages, resolution, telephone line conditions and capability
of receiving unit. 15 second speed based upon CCITT N
0 .I
Test Chart.
^Available for KX-F2781 only.
CCITT No. 1 Test Chart
Note:
• Any details given in these instructions are subject^to change without notice.
•The pictures and illustrations in these instructions may vary slightly from the actual product.
79