Panasonic KX-F2781NZ - Manual (Page 58)

During playback
Repeating a message
Press 0 to play the current message.
—If you press 0 within 5 seconds of playback, the previous message will be played.
Skipping a message
Press to play back the next message.
Note:
• If you hear the voice guide after playing back the
messages, memory is full. Erase some or all of the
messages.
Example of the voice guide:
Not enough recording time. Please erase
unnecessary messages.
Erasing incoming messages from memory
■ Erasing a specific message from memory
Press 0 when the message you want to erase is
played.
—A long beep and the voice guide will be heard.
Then the unit will continue with the next message.
Example of the voice guide:
The message has been erased.
Erasing all messages from a specific memory
You can erase all of the recorded messages from common and each mailbox memory.
To erase all of the messages in a mailbox, you must first select a mailbox.
Press (3 U] when you want to erase the messages
in a specific memory.
—A long beep and the voice guide will be heard.
Example of the voice guide:
All messages have been erased.
Other remote operations
Recording a marker message
After playing back the recorded messages, you can leave an additional message.
Example of the voice guide:
1. Wait for the voice guide indicating the end of the
remote operation,
2. Wait about 10 seconds.
3. Hear the voice guide.
4. Leave a message.
All messages have been played.
'1
Please leave your name and message
añer the beep.
58