Removing the handset citadle, Caution, Cleaning the inside of the unit – Panasonic KX-F2781NZ User Manual
Page 78
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Removing the handset citadle
To save space or to use the unit mainly for faxes, you may remove the handset cradle.
1
2
3
Set the handset switch to NO HANDSET (see
page 65).
Pull the hooks to the right in the order as shown,
while lifting up the handset cradle.
Disconnect and connect the power cord again.
Caution:
• If the handset and handset cradle have been
removed when you connect the power cord, an
alarm will sound and the following message will
be displayed.
CHECK CRADLE
Set the handset switch to NO HANDSET (see
page 65).
Cleaning the inside of the unit
If misfeeding occurs frequently or dirty patterns or black bands appear on a copied or transmitted document,
clean the document feeder rollers, sub roller, rubber flap, white plate and glass.
1
2
3
Disconnect the power cord and the telephone line
cord.
White plate
Open the front lid by pressing the front lid open
button.
Clean the document feeder rollers and sub roller
with a cloth moistened with isopropyl rubbing
alcohol, and let dry thoroughly.
Clean the rubber flap with a cotton swab
moistened with isopropyl rubbing alcohol, and let
dry thoroughly.
5
6
Clean the white plate and glass with a soft dry
cloth.
Close the front lid by gently pressing down on both
ends.
Connect the power cord and the telephone line
cord.
Caution:
• Do not use paper products (such as paper towels
or tissues) to clean the inside of the unit.
78