Panasonic KX-F2781NZ - Manual (Page 34)

storing phone numbers for automatic dialing^
The unit’s memory allows you to use both one-touch dialing and speed dialing for rapid access to your most
frequently dialed numbers.
One-touch dialing: The unit is equipped with 5 direct call station keys, each of which is divided into an upper
station and a lower station.
Speed dialing: The unit is equipped with 50 additional dialing stations. These stations are assigned to
2-digit numbers (00-49).
1
4
5
6
7
Press [MENU j until the following message is
displayed.
STORE TEL NO.
a: Programming for one-touch dialing:
For upper stations (1 -5)
Press one of the direct call station keys.
For lower stations (6-10)
Press I LOWER], then press one of the direct
call station keys.
b: Programming for speed dialing:
Press ¡^, then press the desired 2-digit number
(00-49).
Enter the phone number up to 30 digits in length.
•To enter a hyphen in a phone number, press
[LOWER].
Press [START/COPY/SETj.
NAME=
Enter the station name, up to 10 characters, by
following the instructions on page 13.
Press START/COPY/SET .
•To program other stations, repeat steps 2 to 6.
Press STOP).
Speed dial
stations
;(D©GD
;®(X)CD
¡CD CD®
:CD_®®
CZDCTDcfD o
Direct call stations
STOP
[LOWER]
(HYPHEN)
f START/COPY/SET]
Helpful hint:
•To confirm stored phone numbers and station
names, print a telephone number list (see
page 69).
To keep whole or part of the
phone number secret
To erase a stored number and
station name
Press [ SECRET] (direct call station 3) before and
after the number you wish to keep secret.
•The phone number will not appear on the display
and on the telephone number list.
• Pressing [SECRET once counts as two digits.
Press [STOP] in step 3 to clear the phone number.
Press [DELETE ] (direct call station 5) repeatedly
in step 5 until all of the characters are erased.
Then, press [START/COPY/SET]
34