Setting the date and time 1 2, Setting your logo, Setting the date and time – Panasonic KX-F2781NZ User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the date, time, logo and facsimile
telephone numl^r
Before using your unit, program the correct date and time, your logo and your facsimile telephone
number.
This information wiii be printed on the top of each page transmitted from your unit.
To change the print position, see page 41.
Press [MENU].
Press then [T].
SYSTEM SET UP
Setting the date and time
1
2
3
4
SET DATE
Sc
TIME
Press i START/COPY/SETl.
5
6
Enter the correct month/day/year/hour/minute by
seiecting each 2 digits.
Then press @ for AM or @ for PM.
Example: Aug. 10 1997, 3:00PM
Press
Q]®
H][T|
®[3]
0®,
then press @ for PM.
Press [START/COPY/SETl.
Press MENU .
Note:
• If you make a mistake while programming,
press iSTOPl then make corrections.
•The accuracy of the clock will be
approximately ±60 seconds a month.
Setting your logo
Usually the logo is a company, division or personal name in an abbreviated form.
Press (MENÜI
1
2
3
SYSTEM SET UP
Press then [^.
YOUR LOGO
Press [START/COPY/SET],
LOGO-
^ Enter your logo up to 30 characters.
5
6
Refer to the instructions on page 13.
Press fSTART/COPY/SET].
Press I MENU j.
12