Setting the ans/fax mode ring count, Helpful hints, Press start/copy/set i – Panasonic KX-F2781NZ User Manual
Page 25: Press start/copy/set
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
When the unit detects a problem, one of the following pre-recorded greeting messages will be
played.
Memory full and out of paper
or
Memory full and unit overheated
Hello! We are unable to answer right now.
To send a fax, please start transmission.
To leave a voice message, please try again later.
Thank you.
Hello! We are unable to answer right now.
Please try again later.
Thank you.
Setting the ANS/FAX mode ring count
This feature determines the number of rings after which the unit answers a call in the ANS/FAX mode.
You can choose from 2 to 9, TOLL SAVER and RINGER OFF.
TOLL SAVER: When you call the unit from a remote location, the number of rings will tell you if there are any
new voice messages. If the unit answers on the second ring, there is at least one new
recorded message. If the unit answers on the fourth ring, there are no new recorded
messages. Hang up immediately when you hear the third ring. The third ring indicates that
there are no new messages. This will save you the toll charge for the call.
RINGER OFF: The unit will answer without ringing.
Helpful hints:
•To answer a call before the unit does, increase the number of rings.
• If you find difficulty in receiving faxes from machines that have an automatic transmission feature, decrease
the number of rings.
1
2
3
4
5
6
Press (
menu
)
Press then [^.
SYSTEM SET UP
ANS/FAX RING
Press START/COPY/SET I.
RING=2
AY
Press (^ or (3 fo select the desired setting.
Press START/COPY/SET .
Press MENU).
25