Panasonic Removable Full Front MP3 WMA /Receiver with CD Changer Control CQ-HR1003U - Manual (Page 58)

Troubleshooting
(Continued)
□ CD/MP3/WMA (Continued)
Trouble
D C
Sound skips due to vi-
bration.
□ CD
Trouble
CD text is not displayed
normally.
Time is counted but no
sound comes out.
Cause/Step
r
Mounting angle is over 30°.
»Adjust mounting angle to less than 30°.
________________ /
Instable mounting.
^Mount the unit securely with the mounting parts, referring to the
section on installation.
• Disc is defective.
• Mechanical trouble.
»Press [OPEN] to open the panel and press [^1 (eject). If normal op­
eration is not restored, call the store where you purchased the unit
or the nearest Servicenter to ask for repairs.
Cause/Step
• Disc is dirty.
• Disc has scratches.
»Clean disc, referring to the section on “Notes on CD/CD Media
(CD-ROM, CD-R, CD-RW)”.
The first track of a mix mode disc was reproduced. (Mix mode is a for­
mat in which data except music is recorded on the first track and music
data Is recorded on other than the first track in a session.)
»Play back music data recorded on other than the first track.
CQ-HX1083U □ MP3/WMA
[ Trouble ]
It takes too long for
playback to start.
Cause/Step
J
The disc does not conform to any of the file systems supported by this
player.
»Insert a disc that conforms to the file systems (ISO 9660 Level 1,
Level 2, Joliet, Romeo or Apple Extension to ISO 9660).
The MP3 file is missing the “.mp3” file name extension.
»Make sure to add the “.mp3” extension to each MP3 file name.
The WMA file is missing the “.wma” file name extension.
»Make sure to add the “.wma” extension to each WMA file name.
The folders and files recorded on the disc are layered too much.
^As checking of files takes longer in this case, do not record any un­
necessary folders or files other than MP3/WMA on the disc.
58
CQ-HX1083/HR1003U