Auto preset memory (apm), Preset station setting, Preset station calling – Panasonic Removable Full Front MP3 WMA /Receiver with CD Changer Control CQ-HR1003U User Manual
Page 35
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Caution:
• To ensure safety, never attempt to preset stations while you are driving.
Preset Station Setting
• Up to 6 stations each can be saved in the FM1, FM2, FM3 and AM preset station memories.
Manual Preset Memory
Manually save a station in the preset memory.
o
© Press and hold
Select a band and frequency, {previous page)
TU^ or [P^iSETl for more
o
o
than 2 seconds until the preset number blinks.
Press
orF^
/[vj
or
[/\]
to
select
a
preset number (1-6).
Press and hold
jP.SETl
(preset) for more than
2 seconds to memorize.
• The display blinks once, and a receiving sta
tion is saved in the memory.
Preset number
Note:
• Frequency setting can be performed even after se
lecting a preset number.
• To suspend preset write, press |0/
spl
41^|/[DISP]
(display).
i
O Select a band and frequency, (previous
page)
0 Press and hold [1] to [6l for more than
2 seconds to memorize.
Auto Preset Memory (APM)
Automatically save stations with good reception in
the preset memory.
O Select a band, (previous page) .
© Press and hold
[APWl
for more than 2 sec
onds.
• The 6 stations with good reception will be auto
matically saved in the memory under preset num
ber 1 to 6.
• Once set, the preset stations are sequentially
scanned for 5 seconds each, (scanning)
(SOURCE) —
[DISP] ------
(display)
mto [6]-—
(preset station)
[BAND]
(auto preset memory)
(band selection)
[<][>]
(tuning)
[V][A]
(preset station)
Note:
• Existing saved stations are overwritten with new stations after this procedure above.
Preset Station Calling
O
Select a band, (previous page)
© Press the Spectrum Analyzer display
|TUNE|
to
show
iP.SETj
(preset).
0 Press^O or^^/[v] or [/^].
(Press [11 to [61 on the remote control unit.)
CQ-HX1083/HR1003U
35