Panasonic PV-C911 - Manual (Page 9)

4 L Key to E
CHANNEL / CLOCK AUTO SET -
operation. Settings are performed
automatically. If the setup is
completed, the following screen is
displayed.
2/7/2001 WED 12:00PM
DSt:ON
SETHN© : CH 10
AUTO CLOCK SET
COMPLETED
END : PRESS CH UP KEY
If AUTO CLOCK SET IS
INCOMPLETE screen appears, set
the clock using MANUAL CLOCK
SET procedures as below.
AUTO CLOCK SET
IS incomplete
please SET CLOCK BY
PRESSING ACT* OH KEY
MANUAL CLOCK SET
If AUTO CLOCK SET was incomplete,
manually set the clock as follows.
1 Press ACTION K^ on the Remote
to display SET CLC j CK Menu screen.
VI/ SET CLOCK
2
/ l \ '
SELECT MONTH
SELECT:A T ^ .
SET : ►
,EHD ¡ACTION
DSt:ON
Press
A
▼ to select the month and
press ► to set. In the same manner,
select and set the date, year, time,
and DST. (Daylight Saving Time).
SET CLOCK
2/ 7/2001 WED 12:00PM
.DST;ÒN
3
SELECT COMPLETED
SET " ■
END' i ^ACTION-
Press ACTION Key twice to start
CLOCK and exit.
POWER-
ACTION-
ooo
„ 5 0 0 0
O O O O’
eetim»
SO O© ©
5
©o
5
:
o <
2
) o
_
SELECT/
o © o
tm muFn ^ mn *
o o
O
O w
SET
CH UP
CH DOWN
VOL UP
VOL DOWN
Model PV-C921/PV-C931W
remote is shown here.
Reset all unit Memory Functions
When moving unit to a new location, or if a
mistake was made in the Initial Setup
section.
• Make sure a tape is not inserted in the unit.
iò5 T ;..
1
Turn the unit
Power on.
2
Press and hold both PLAY and
FF on the unit for more than 5
seconds.
• The power will shut off.
3
Do “Initial Setup” on page 8.