Panasonic PV-C911 - Manual (Page 14)

Playback a Tape Record On a Tape
Ready Check List
□ All connections are made.
□ Your unit is plugged in.
Insert a cassette.
• The unit power comes
on automatically.
To prevent tape jam,
remove loose or peeling labels
from tapes.
2 Press PLAY.
• Playback begins if cassette has no
record tab.
fl Forward/Reverse scene search
Press FF or REW
Press again or PLAY to release.
■ StitI (Freeze) picture
Press PAUSE/SLOW
Press PLAY to release.
■ Slow Motion picture
Hold down PAUSE/SLOW in
Still mode
Press PLAY to release.
■ Frame by Frame picture
Press PAUSE/SLOW in Still mode
Press PLAY to release.
• These features work best in SLP mode.
• After the unit is in Still or Slow mode for 3
minutes, it will switch to Stop mode automatically
to protect the tape and the video head.
■ Stop ^ Press STOP
■ Rewind tape Press REW in Stop mode
■ Fast forward tape Press FF in Stop mode
■ Eject tape Press EJECT on the remote
or STOP/EJECT on the unit
You can operate on the unit
CHAT
PLAY
Insert a cassette.
d
i '
-
l JT___
bis
■> T '
REC
V
Press to stop and/or REC Indicator
eject tape.
1
Insert a cassette with record tab.
• The unit power comes on automatically.
Press CH AW or number keys to
Select Channel.
• For “LINE” input, see bottom of next page.
Press SPEED to select recording
speed {see page 41).
SP = Standard Play
LP = Long Play
SLP = Super Long Play
• Selected speed is displayed.
4 Start Recording.
Press REC.
• To edit out unwanted portions, press
PAUSE/SLOW to pause and resume
recording.
• You cannot view another channel during
recording.
M Stop Press STOP
• When using DC Power supply, pressing
POWER on the remote will cancel
Recording in progress.
■ One Touch Recording (OTR)
Press REC repeatedly
length (30 min - 4 hours.)
• The unit stops recording at a preset time.
• PROG TIMER indicator lights on the unit.
• After the unit has been in Rec Pause mode for 5
minutes, it will stop automatically to protect the
tape and the video head.
• The remaining recording time of an OTR
can
be
displayed by pressing DISPLAY.
• When using DC Power supply, pressing POWER
on the unit will cancel an OTR in progress.
EJECT
DISPUY-
NUMBER-
Keys
TRACKING
PAUSE-
/SLOW
5tt|-SPEED
Model PV-C921/
PV-C931W remote is
shown here.
14
For assistance, please call; 1-800-211-PANA(7262) or send e-maii to : [email protected]