Panasonic PV-C911 - Manual (Page 23)

FM Transmitter
Send WIreles
Within 33 feet Audio equipment
with FM Radio
■ [Carrier Frequency : 93 - 97. 99 - 103 MHz[
FM Transmitter is ...
a feature whereby this unit’s sound can be
heard on an FM Radio. First, tune your radio to
a vacant station which has no radio broadcasts
between 93 - 97 or 99 ~ 103 MHz. Then, set
the combo to the same station. Now, fine-tune
this unit so the sound comes in clearly.
FM Transmitter Carrier Frequency Setup
1
Press ACTION
to display MAIN MENU.
1) Press to
select “TV.”
2) Press ACTION to
display SET UP TV
screen.
SET UP TV
U3CK
CAPTION
INPUT SEL£CT
VIDEO ADJUST
SfWm
:C
SELECT;A ▼
SET
END :ACTION
1) Press AT to select
SET UP FM.
2) Press ► to display,
screen.
FMWTTENrM ;Wr
FMTf«NSH(TTEfi ; OFF
SFLFCT:* T
SET
END ; ACT IO N
1) Press AT to select
SET UP FM
TRANSMITTER.
2) Press ^ to display
screen.
When step 4 is done, if FM TRANSMITTER is
“OFF,” the unit is automatically set to “ON."
SET UP FM TflANSM rTTER
B3UHI »TM Hi
SELECT;* T
SET
«>
end :ACTICW
SET UP FW TRANSMCTTER
1) Press AT to select
the desired frequency
range. {93-97 or 99-
103 MHz)
2) Press ^ 1^ to select
the Carrier Frequency.
3) Press ACTION to set;
the Carrier Frequency.
(The screen in step 4
is redisplayed.)
To Make Corrections,
select frequency with CH AT'^ ►, then repeat step 5.
6
Press ACTION four times
to end setup
FM Transmitter Control 1
Do “FM Transmitter Carrier
Frequency Setup” steps 1 -3 at left.
SET Up FMTFWNSMfTTeft
SELECT;* »
SET ;*
END -.ACTJON
1) Press AV to select
FM TRANSMITTER
2) Press ►to select
“OFF or “ON.”
Press ACTION three times
to end setup
r Wiw taa m lU»
©oo o
DISPUY-fj-^CD O 0|
■bo® o'
__ J^UMBER
¡O O O ®
O © ® b4f-ADD/DLT
o_<^o
ACTION-O O
SELECT/SET
UP
▼:CH DOWN
► :VOL UP
◄ :VOL DOWN
FM/TV
Model PV-C921/PV-C931W
remote is shown here.
• The Carrier Frequency shown by the selector
bar is a guide only. Please listen to the sound
and adjust accordingly.
• The unit will transmit sound when unit power is on
and “FM TRANSMITTER :ON" is selected.
• When unit power is turned off, “FM TFIANSMITTER”
returns to “OFF setting.
• The FM transmitter signal range varies
depending on installation and operating
requirements of your equipment.
• Interference occurs when you select CATV
channels 95, 96, or 97, while FM Transmitter is
operating.
• FM Transmitter will not work in FM Radio Mode.
• Please note the current FM Transmitter
capability is the maximum level allowed by FCC
standard for low power license-exempt radio
communication devices.
23