On-screen display (osd), Press display, Vcr status & clock display – Panasonic PV-C911 User Manual
Page 38: Blue screen display, Channel & function display, Dew detection system
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
On-Screen Display (OSD)
VCR Status & Clock Display
Press DISPLAY
to display or remove the overlay.
Function Status
Current Time
Channel Caption
(See pages 30, 31.)
Rec Time Remaining-
(OTR mode only, see
page 14.)
REC
12;00PM
ABC
0:26
-0:12:34-
SPs
12/27/1999 MOM
12:00PM -
1:00PM
CH 08 ABC MOVIE
-Counter
"Tape Speed
Time Stamp Data (See page 33.)
Blue Screen Display
Whenever a blank section of a tape comes
up in Play mode, or when the selected
channel has no broadcast signal with the
Weak Signal Display set to “OFF" (see
page 32), the screen will turn solid blue.
Channel & Function Display
When a function button is pressed (PLAY,
FF, etc.) or you change channels, the unit
mode or channel number will be displayed.
(Some station names may also appear if
Channel Caption is set. See pages 30, 31.)
Dew Detection System
To prevent damage to your tapes, this unit
is equipped with a dew detection system.
When moisture condensation is detected
inside the unit, “DEW" will appear
on-screen for a few seconds. If a tape is
inserted, it will be ejected.
Also, VCR functions will be non-operational
until dew condition passes.
Press DISPLAY to see if dew condition still
exists. In order to avoid this condition, try
not to move the unit directly from a cold
place to a warm place. TV functions are
not affected.
38
For assistance, please call: 1-800-211-PANA(7262) or send e-mail to : [email protected]