Panasonic PV-C911 - Manual (Page 18)

TV Timer Features
ON-TIMER with Alarm
This unit can be set to automatically power on in one
of 3 modes (2modes [PV-C911 only]),
(TV, Playback, or FM radio [PV-C921/PV-C931W only].)
(TV or Playback [PV-C911 only].)
You can also combine the On-Timer with a one
minute alarm that gradually increases in volume.
1
Press PROG
to display SET PROGRAM screen.
SET PROGRAM
T imer - prqgrammwo .
SELECT;* ▼
SET- ;!►
ÉT©' :PfiOG
1 ) Press AW to select
“ON TIMER.”
2) Press ► to display
ON TIMER screen.
a/0h<,p>
StLECT ; a ▼
S et - ■
EHO :FflOG
•ON-TIMER mode
selection order
J^CH02—CH03..... CHI 25^
CH01 PLAY
W m 9—FM8..................FM1---------- ^
(PV-C921/PV-C931W)
^CH02—CH03"
CHOI
►PLAY-
•CH125~j
1 ) Press
AW
to select
desired settings.
2) Press ► to set the
ON-TIMER TIME or
ON-TIMER mode.
• Make sure a tape is
, inserted if Playback mode
is selected.
• See “FM Radio” on page
22 for instructions on
how to preset FM
stations. (PV-C921/
PV-C931W only)
{PV-C911)
-GN-T;
CANCEL ;ACD/,OLT
SELEGT í A t : :
ET® -' ■ ÍÍÍHOG' :■
Press
AW
to select
ALARM “ON” or “OFF.”
When "ON” is selected,
an alarm will gradually increase in volume for one
minute or until canceled by pressing any button
(including VOL + -).
To Make Corrections,
use
AW
and ◄ ► to move back and correct.
5 Press PROG
to set ON TIMER.
• “ON TIMER SET is displayed.
ON TIMER Indicator lights on the unit.
Ready Check List
□ The cicxjk is set to correct time.
TIMER (PV-C911)
To Cancel ON-TlMER set,
Repeat steps 1 and 2.
Then, press ADD/DLT to clear the
time in step 3. Now, press PROG
to end. “ON TIMER END" briefly
appears on-screen.
CIS®
If no button on the remote or unit
(including a button used to turn off
the alarm) is pressed within 60
minutes after unit turns itself on, it
will turn itself back off.
18
For assistance, please cali: 1-800-211-PANA(7262} or send e-mail to : [email protected]