Panasonic PV-C911 - Manual (Page 26)

Tape Operation
Search System is...
Each time a recording is made, an invisible index mark is placed on the tape.
When timer recordings are made, program index and intormation are also included.
{Only AC POWER) These index marks can be used to access or scan recordings.
Index Search
Go directly to the desired recording.
Press SEARCH in
Playback or Stop
mode to display
INDEX SEARCH
screen.
1 ' (NDgXSEABCri
ENFreB INDEX NliiMBER:!'
USI Nfi 1-9:KE¥Si ' ■ ,
FORWARD SEARCB i FF
REVERSE'SEARCH ;REW
NBCTiSEARCM
EXtTiSTOP-
p—
SEARCH 3
I'NCE x : SBffKH
Press number
keys
to select the
recording number.
• To calculate
number, see below.
INPEXSgARCH
F orward SEARCH :FF
REVERSE SEARCH;REWif
Press FF or REW
to start search.
• Play begins at search
end. To search
forward or back 1
index, press FF or
REW \^ile screen
left in displayed (10
seconds).
■ To calculate the Index Number
Example 1:
To go to rec. 2 from rec. 4, enter 3 and press REW.
Example 2:
To go to rec. 6 from rec. 2, enter 4 and press FF.
Model PV-C921/PV-C931W
remote is shown here.
«■lEBiiEBira * •
NOTE: I indicates start points of each recording.
• Make each entry within 10 seconds, or the
Index Search rinode will be canceled.
• If Index Search is started very close to an
index mark, that index mark may not be
counted in the search.
26
For assistance, please call; 1-800-211-PANA(7262) or send e-mail to: [email protected]