Connecting to a pc – Panasonic DMC-LC43A User Manual

Page 80

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Technical use

Connecting to a PC

[Preparation]

• If your PC uses Microsoft Windows® 98 or Windows® 98 Second Edition, a USB

driver must be installed from the CD that is included. If you are using a newer
Microsoft operating system such as Windows® Me, Windows® 2000, or Windows'^
XP {Home Edition/Professional), no USB driver needs to be installed. Your PC
should recognize the camera automatically.

Insert the Memory Card into the camera, and turn the power switch to

[ON].

Connect the camera to a PC via the supplied USB connection cable (T).

[Windows]
The drive is shown on the [My Computer] folder.

• If it is the first time you are connecting the camera to a PC, the required driver is

installed automatically so that the camera can be recognized by the Windows

Plug and Play, then it is shown on the [My Computer] folder.
[Macintosh]

The drive is shown on the screen.

• The flash/access indicator lights during access.

• When the battery power is lost during access, the data may be destroyed. The

battery indicator does not appear. So when connecting to a PC, use the batteries
which the remaining power is enough or AC adaptor (|) (optional, DMW-AC

• When connecting to a PC, pictures and sounds are not output from the

OUT

socket.

• For further information (software installation), read the supplied operating

instructions for PC connection.