To set manually (white set), 1 press the [menu] button, 2 press a/t to select [w.balance – Panasonic DMC-LC43A User Manual
Page 50: 3 press ◄/► to set to white set [q, 4 press, 6 press the [menu] button
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1,6 2,3,4
Recording images (advanced)
To set manually (White set)
Here the white set mode of white balance is
explained.
[Preparation]
• Set the mode dial except for
[(Bl/iVFlOl- (P23)
1
Press the [MENU] button.
2
Press
A / T to select [W.BALANCE],
3
Press ◄/► to set to white set [Q].
Only when setting the white balance again
4
Press ►.
• The message "FRAME THE CAMERA AT
THE WHITE SURFACE AND PRESS
SHUTTER” is displayed.
5
Aim the camera at a sheet of white
paper 0 or simiiar object so that It
compietely fills the frame to white on
the screen and press the shutter
button all the way.
• White balance is set.
6
Press the [MENU] button.
• The menu will disappear.
IFRAME THE CAMERA
AT THE WHITE SURFACE!
[AND PRESS SHUTTER
CAN0Elh
HE№
When taking a picture with the flash after
setting the white balance manually, the
white balance may not be properly adjusted.
We recommend setting the white balance to
[AUTO] when using the flash.
50