Inserting the card, Removing the card – Panasonic DMC-LC43A User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Preparation
Inserting the Card
3,7
5,6
[Preparation]
• Check that the power switch is set to [OFF]
and the lens is stored.
[Inserting the card]
1
Slide the door in the direction of the
arrow to open the Memory Card door.
2
Insert the card until the label of the
card is hidden.
• The card clicks when you insert it
correctly.
• Check the direction of the card.
• Do not touch the connection terminals on
the back side of the card.
3
Slide the door to the direction of the
arrow to close the Memory Card door.
[Removing the card]
4
Slide in the direction of the arrow to
open the Memory Card door.
Press the card to release.
Pull the card out.
5
6
7
Slide the door to the direction of the
arrow to close the Memory Card door.
If you are using a MultiMediaCard type
memory card and the Memory Card door
cannot close, the card may be installed
backwards. Remove the card and reverse it,
then try to dose the door again.
If the Memory Card door cannot be
completely closed, take the card out and
insert it again.
If the card cannot be fully inserted, verify
whether the direction of the card is correct.
We recommend that you use a Panasonic
branded SD Memory Card. (Use only the
genuine card)
' If the card is not fully inserted, the card may
be damaged.