Panasonic DMC-LC43A - Manual (Page 79)

Technical use
Playing Back Images with a TV Monitor
By connecting the camera to a television via the supplied AA/ cable ©, it is possible
to view and play back the recorded images.
[Preparation]
• Turn the camera and the television off.
1 Connect the A/V cable 0 to the AA/ OUT socket of the camera.
2 Connect the AA/ cable to the video in and the audio In sockets of the TV.
• Yellow; to the video in socket
• White: to the audio in socket
3 Turn the television on and select external input.
4 Turn the camera on and then set the mode dial to playback [@].
• The image is displayed on the television.
■ Viewing images in other countries
When setting [VIDEO OUT] on the menu, you can view images on the TV in other
countries (regions) which use the NTSC or PAL system.
• Even if you set menu selection for [VIDEO OUT] to [PAL], the output signal is still
NTSC. •
• When connecting to a TV, use the batteries which the remaining power is enough
or AC adaptor (optional, DMW-AC2).
• Do not use any other cables except the supplied one.
• The A/V cable cannot be connected to the “antenna" connection of your television.
Your TV must provide separate audio and video connections for this feature to
operate correctly.
• Read the TV operating instructions too.