Turning power on/off, Status indicator, Lighting – Panasonic DMC-LC43A User Manual
Page 19: Blinking, B flash/access indicator
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Preparation
Turning Power on/off
® 1.2
1
Set the power switch to [ON].
• The Status indicator © lights.
2
Set the power switch to [OFF].
When the power switch is turned on, do not hold the lens cover. If the lens cover
does not open, [SYSTEM ERROR] is displayed. Turn the power switch off and on.
Do not make a pressure on the lens when the lens tube comes out.
■ Status Indicator ®
Lighting:
• When turning the Power switch to [ON].
Blinking:
• While the focus is being adjusted or the
focus is not properly adjusted,
• When the card is not inserted.
• When no space is left on the card.
• When the remaining battery power is low.
(blink siowly)
B Flash/Access Indicator ©
Lighting:
• When accessing the card.
• When the flash fires. (It lights when the
shutter is pressed halfway)
• When sending data to PC.
Blinking:
• When charging the flash.
• When setting the flash mode to forced off
and recording in dark places.
(blink slowly)