Recording motion images, 1 set the mode dial to motion image mode [ol – Panasonic DMC-LC43A User Manual
Page 30
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Recording images (basic)
Recording Motion Images
With this camera you can also record motion
images. (If using the supplied 16 MB SD
Memory
Card, it is possible to
record for up to
about 80 seconds)
1
Set the mode dial to motion image
mode [Ol-
2
Center the subject on the LCD monitor
and press the shutter button halfway.
• When the focus is adjusted, the focus
indication @ [•] appears.
3
By pressing the shutter button fully,
the recording starts.
• The audio REC starts simultaneously.
(Ф Microphone)
4
By pressing the shutter button fully
again, recording stops.
• If during the recording the memory of the
card becomes full, the recording is
slopped automatically.
•
• Audio cannot be played back from this camera. Connect to a television or PC
to play back audio.
• The picture size is fixed to 320x240 pixels.
• The remaining time displayed on the LCD monitor is an approximation.
• You cannot record motion images without audio.
• If using the MultiMediaCard, after recording motion images, the card access
indication and the flash/access indicator may appear for a while, but this is not a
malfunction.
• After recording starts, the auto focus/zoom/white balance/aperture values are
locked (with the first frame).
• Recording could suddenly stop when recording motion images with cards other
than a Panasonic SD Memory Card.
• When the motion image recorded with this camera is played back on other
equipment, the quality of pictures and sounds may be deteriorated or pictures may
not be able to be played back.
• In motion image mode review cannot be used.
30