Prepare for recording, Select the desired source, Press © rec/® play – Panasonic SC-CH64M User Manual

Page 34: Press power to put your ste> reo on standby, To check settings (only while power is on), To change settings (only while power is on), For your reference, To switch the timer off, Using the record timer

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Using the record timer

©REC/
©PLAY

POWER

STANDBY

Prepare for recording.

1. Insert a tape into the deck with the

forward side facing you.

2. Select the reverse mode.
3. Select which direction the tape runs

in.

4. Press EQ SPACE to select “FLAT’.

Select the desired source.

When you record from the radio;

Press TUNER BAND to select a band
and tune in the desired station.
When you record from a unit con
nected to the “AUX” terminais:

Press AUX.

Press © REC/® PLAY.

Your selections and setting will be stored
in the timer’s memory.

Please confirm “© REC lights on the
display.

Press POWER to put your ste>
reo on standby.

Recording will start 30 seconds before

the set time.

Sound is automatically muted while the
record timer is working.

To check settings (only while power is ON):

Press CLOCK/TIMER 2 times and check “© REC" is displayed.

Two seconds later, the display will change in the following order,
© Recording start time

® Recording over time
(5) Recording source

To change settings (only while power is ON):

Using the timer at the same time setting continu
ously;

(You can accomplish this even if your stereo is on standby.)
Press © REC/® PLAY and check “© REC” is displayed.

To enjoy the desired source after the timer setting

is completed;

1, After finishing step 6, start playing the desired source.

Even if you change the music source, the timer recording will start

with the preset condition.

2. Press POWER to set the stereo on standby after enjoying play,

and confirm a tape is inserted in the deck.

•if the power is on, the timer will not function.
•The ON time and OFF time cannot be the same setting.

•If you switch the power to the standby mode white the record timer

is functioning, the OFF time setting will not be activated.

•Play timer cannot be used in combination with a record timer.

For your reference

•Set recording to start roughly two minutes ahead of time,
• External sources must be connected to the “AUX" terminal. How

ever, time settings apply only to this stereo. For more information,
see the instruction manual of the connected unit.

To switch the timer OFF:

Press ® REG/© PLAY and check “© REC” goes out.
The settings made with the preceding procedure wilt however be kept
in memory.