Panasonic SC-CH64M - Manual (Page 14)

Listening to compact discs
Sequential play
Listening to a particular track on a particular
disc first
by remote control only
2-3
ba|
OQ
OciiOo
nci>6e>
CJciD
Sr----
J
Press DISC.
21 Sr
-- '■il B i t
djCiC)
While is flashing (approx. 10 seconds)
Press the numeric button(s) to
select the desired disc.
If you want to start listening from the first
track, you do not need to perform step 3.
Press the numeric button(s) to
select the track.
The changer will play all CDs up through
the one before the CD you started with,
and it will stop automatically after playing
the last track on it.
Selecting double-digit discs and tracks numbers:
First press >10, and then press the numbers for the two digits.
For example: number 20
Press >10, then 2, and then 0,
Single disc play
Single disc play is for that special disc of yours, perhaps one you just
bought. You see, the changer has a slot for one special disc which
you can use even when the rack is full (max. 60 discs).
Open the rack panel, and set the disc in the
slot No. 0.
Slot number
SINGLE PLAY
Close the rack panel and press
SINGLE PLAY.
The disc will start playing from the first
track.
1?D /
■■ ''■f B.»
The changer plays all the tracks in order
and stops automatically when the last
track finishes playing.
To cancel single disc play mode:
• Select another disc by pressing DISC and the numeric buttons on
the remote control.
•Skip to another disc with DISC SKIP/GROUP NAME. (See
page 23.)
•Select a group. (See page 17.)
• In the block mode, press a GROUP FILE button (A-F).
For your reference
While “SINGLE" appears on the display, you can start play from the
button as well as SINGLE PLAY.
14