Speaker section zoom ring, Focus ring, Volume button – Panasonic TC-LT1 Series User Manual
Page 9: Cursor button, Menu button, Optical receiver for remote control, Lamp monitor, Temperature monitor, Main power switch, Projector
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Description of Each Section
The circled numbers listed (example (^) indicate the page on which the explanation of that section begins.
Projector
Lamp Unit Storage Bay
Stores the Lamp Unit
Speaker Section
Zoom Ring
(Monaural)
Rotate the zoom ring to adjust
Stores one (1 W) Speaker the screen size.
Focus Ring
Rotate the focus ring to
adjust the focus.
AV/RGB Switching
^ Button
Switches the signal being
projected each time the button
is pressed.
Carrying Handle
Use when carrying
and taking out of
handle.
Adjuster Button
m
3/ Used to adjust the tilt of
^ Power Button
M-V When the main power is orv
this button turns the power
on or off.
the projector.
/^Volume Button
Adjusts the internal speaker volume
at video input mode.
Cursor Button
m
3/ Use to select, adjust and set the menu screen options.
Menu Button
Turns the menu display on the screen on and off.
Optical Receiver for Remote Control
Optical Receiver for the signals from the Remote Control.
©
Power Display Lamp
This lamp illuminates in red when the main power switch is ON,
and in green when the power switch on the remote control is ON.
It flashes in green on and off for about 2 minutes when the cooling
fan is running after the power has been turned off.
^ Lamp Monitor
Turns on when it is time to change the lamp unit, and flashes on
and off when the lamp circuits are not functioning properly.
Temperature Monitor
Reports abnormal temperatures in the projector by turning on or
flashing on and off.
Main Power Switch
Turns the main power ON and OFF (when the power is turned on,
the projector enters stand-by mode.)