Signal names for d-sub 15 connector, System examples, Connecting to pcs – Panasonic TC-LT1 Series User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
System Examples
Connecting to PCs
PC
Back of Projector
—To Video Output Terminal
S
Some PCs require commercially sold RGB signal
* conversion adapters.
N
RGB cable
D-sub 15p
RGB IN
r
-------
------------------V
(0>
s____________
f o o o o o 1
\ o o o o o /
\ o o o o o ;
• lease refer to the data presented on page 25 concerning PCs that can be connected
to the Projector. In some cases other PCs may not work with this projector.
• There is no audio signal in RGB input.
• Some PC models cannot be connected to the Projector.
• A commercially sold adapter is required to use the included RGB cable (D-sub 15P)
to connect a PC-98 series computer (which has a D-sub 15P terminal) or a Macintosh
computer to the projector.
There is no need to use an adapter for computers with DOS/V compatible D-sub 15P
terminal.
Signal Names for D-sub 15 Connector
( D ® @ ® ©
® ® ® @ ®
Pin Layout for RGB Input Terminal
Pin No.
Signal Name
Pin No.
Signal Name
Pin No.
Signal Name
©
R
®
GND (Ground)
®
GND (Ground)
G
@
GND (Ground)
NC
(D
B
®
GND (Ground)
®
HD/SYNC
GND (Ground)
@
NC (not connected)
VD
(D
GND (Ground)
GND (Ground)
©
NC (not connected)
24