Cleaning and proper use, Cleaning, Icare when setting up the projector – Panasonic TC-LT1 Series User Manual
Page 30: Cautions for use
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Cleaning and Proper Use
Cleaning
... Always unplug the power cord from the socket before cleaning.
Wipe gently with a soft doth to dean.
If the Projector is heavily soiled, moisten the cloth with a
neutral cleanser diluted in water,
and wring out the cloth before
using. Then wipe dry with a dry cloth.
\ /
^
Do not use insecticide, benzme, paint thinner or
explosive substances.
This will cause damage to the case or strip off the paint. Also
do not place in contact with rubber
^ \
^
or vinyl products for an extended
period (this can cause damage
to the case).
Î>=
t
1
Do not apply cleaning fluid directly to the
Projector.
Droplets falling inside the cabinet can cause the
Projector to break down.
Do not wipe the lens surface or the mirror
surface with a nappy cloth or a cloth that has
dust.
Foreign matter or dust on the lens surface will be
magnified and projected onto the screen.
Wipe clean with the polishing cloth included with the
projector, or a soft clean cloth.
Before using chemically treated cloth, make sure to read
the accompanied cautions.
ICare When Setting Up the Projector
Avoid direct sunlight and keep away from
heating equipment.
This can warp the case and cause the Projector to break
down.
Be Careful of Interference Between Equipment
To avoid warping from weight and electromagnetic
interference that can distort images and sound.
Turn the power Off when connecting
Follow the user manuals when connecting devices,
(including audio equipment, video equipment, game
machines, video disk equipment, speaker boxes and
PCs).
Leave space around the Projector
• Air circulation will reduce the amount of dust adhering
to wails and other surfaces.
• Use the designated units when mounting on a wall or
the ceiling.
■Cautions for Use
Do not Short Circuit the Interval Between
Opposing Poles of the Batteries (Interval
Between (-
1
-) Pole and (-) Pole).
This can cause the batteries to become unusable.
If Battery Leakage Occurs (for the Remote
Control Batteries)
Wipe the battery case fully with a cloth if leaking occurs,
and replace the battery. If any part of your body comes
into contact with the leaking fluid, wash these areas fully
with water.
30