Panasonic TC-LT1 Series - Manual (Page 5)

Warnings and Cautions
A
Cautions
DO NOT place in humid or
dusty locations, or areas
exposed to smoke or
steam.
DO NOT place in direct
sunlight and other sources
of direct heat.
DO NOT look into the
projection lens when the
projector is in use.
The projection lens emits
strong light. Looking into
this lens may damage your
vision.
Make sure that the lamp has
cooled off fully before
replacing the lamp unit.
(Caution, High Temperature)
The lamp will be very hot
immediately after use.
Touching it can cause burns,
and objects placed in contact
with the lamp may be
deformed or damaged by the
heat.
Be careful of hot air being
expelled from the air exhaust
vent.
The air exhaust vent expels
hot air. Do not place your hand
or face in front of this vent as
you may be burned. Also do
not place objects sensitive to
heat near this vent, as they may
be damaged or warped by the
hot air.
Please ask your dealer or
installation company about
installing or attaching before
attempting to do so
(depending on the type of
residence you have, certain
types of installation may not
be possible).
DO NOT OBSTRUCT
VENTILATION HOLES.
Excess internal heat may lead
to fire or damage to the unit,
Please observe the following:
•Do not place it in confined
spaces such as cabinets
or bookshelves.
•Do not coverit with sheets.
Do not place it on carpets or
mattresses.
DO NOT stand, or place
heavy objects on the unit.
Particular care should be
taken by families with small
children.
DO NOT touch the power plug
If your hands are wet.
Before cleaning, unplug the
power plug from the socket. Unplug the power plug from
the socket if you are not going
to use the unit for an Extended
period.
Turn the power “Off" before
connecting other electrical
equipment. Hold the plug by hand when
unplugging it from the wall
outlet.