Leica Geosystems GPS System 500 - Getting Started with Static and Kinematic Surveys - Manual (Page 34)

34
Static and Kinematic Surveys-2.0.0en Programming wake-up sessions
6
7
8
9
3
3
9
3
4
Programming Wake-up Sessions
Navigate to the Wake-up session
menu. This menu can be found under
"3 Applications / 04 Wake-up
Sessions":
In this screen it is now possible to
create new sessions, edit and delete
existing sessions:
Press F2 NEW to create a new
Wake-up Session.
The following display appears:
Press F1 CONT.
The following display appears:
Define the job in which the data
should be stored. Highlight this input
line and press ENTER. This gives
you the opportunity to select from the
list of existing jobs or to create a new
job.
The Auto-Wake-up functionality
allows you to preprogram the
operation of a sensor. By defining
start and end times and a
configuration set the sensor will
automatically start up at the
predefined time and take
measurements according to the
configured parameters and again
stop at the predefined time.
This function is useful if a sensor has
to be left unattended and the GPS
survey campaign is still hours ahead.
This way battery power and memory
is saved.
Wake-up sessions are programmed
in the following way: