Leica Geosystems GPS System 500 - Getting Started with Static and Kinematic Surveys - Manual (Page 27)

27
Static and Kinematic Surveys-2.0.0en Exploring the sensor status during operation
6
7
8
9
13
23
Display current navigated position Battery and memory status, contd.
The current position can be found
under STATUS in submenu "1
Survey / 3 Position". The following
screen is displayed:
The graphics indicate the level of
consumption for each device.
For instance in this particular
example about 35 % of the PC-card
is already used up.
Currently active devices (for both
data recording and power consump-
tion) are indicated by an asterisk
Pressing F1 CONT gets you back to
your previous operation. Pressing
ESC brings you back one level only
(in this particular case to the "STA-
TUS \ General" Menu.