Step 3 (optional): format your memory card – Leica Geosystems GPS System 500 - Getting Started with Static and Kinematic Surveys User Manual

Page 15

Static and Kinematic Surveys-2.0.0en

Taking Static / Rapid-Static measurements

6
7
8
9

Step 3 (optional): Format your memory card

You are now in the Utilities \ Format

Memory Module panel:

If you want to format the PC-card just

press F1 CONT to format the card. If

you want to format the internal

memory press ENTER. A listbox

opens which allows you to select the

internal memory.

Before you start logging data you

may want to (re-)format your PC-card

or your internal memory.

This step is only necessary if

a completely new PC-card is

used or all existing data

should be deleted !

Press 4 on the terminal or use the

cursor down key to highlight the line

"4 Utilities", then press ENTER;

alternatively press F1 CONT.

(If only lines 1 to 3 are visible at this

stage press F4 SHOW first).

Then press 2 to get access to the

"Format Memory Module" panel, or

alternatively use the cursor key to

navigate to "2 Format Memory Mod-

ule" and press ENTER; again

alternatively press F1 CONT.