BendixKing KLX 135 - Pilots Guide - Manual (Page 11)

KLX 135 Pilot’s Guide Introduction
v Effective Date 3/94 006-08751-0000 Rev 0
TO: SEE PAGE:
Enter a user-defined waypoint remark on the SUP 3 page ................4-57
Enter a waypoint identifier ...................................................................4-12
Enter an airport remark on the APT 3 page ........................................4-51
Enter the local magnetic variation manually on the SET 2 page ........5-14
Fly Direct To a waypoint......................................................................4-28
Fly direct to a waypoint in the active flight plan (FPL 0) .....................4-42
Initialize the position from the SET 1 page .........................................4-18
Recenter the D-Bar by going direct to the active waypoint.................4-30
Select a VOR or NDB by navaid name ...............................................4-25
Select a waypoint by identifier from a waypoint page.........................4-20
Select a waypoint by scanning with the cursor off ..............................4-22
Select a waypoint by scanning with the cursor on ..............................4-22
Select an airport by scanning the airport name ..................................4-26
Set the date on the SET 2 page..........................................................4-58
Set the time on the SET 2 page ..........................................................4-59
Store the active flight plan as a numbered flight plan .........................4-37
Tune a COMM frequency......................................................................3-1
Tune a COMM frequency from the data base ......................................3-3
Tune a COMM frequency using the active frequency
entry mode .........................................................................................3-2
Tune a COMM frequency using the standby frequency
entry mode .........................................................................................3-1
Tune a 25 kHz COMM frequency .........................................................3-2
Turn on and initialize the KLX 135 ........................................................4-2
Update the KLX 135 data base .............................................................2-3
View a message ..................................................................................4-16
View the Nearest airports, VORs, or NDBs ........................................4-24
View the waypoints in the flight plan that are not the
active waypoint.................................................................................4-41