Number autodialing keypads – Talkaphone ETP-402V Dual Button Emergency / Information Phone User Manual
Page 18
10-Number Autodialing Keypads
V. 10-Number Autodialing Keypads (ETP-400KE, ETP-400KSE, ETP-402KE,
ETP-402KSE)
A. Programming
To program the autodialing phone numbers for buttons 0-9, use the following
codes:
*13* …[up to 11 digits]*
Programs the phone number called by the RED button (if available)
*23* …[up to 11 digits]*
Programs the phone number called by keypad button #0
*80* …[up to 11 digits]*
Programs the phone number called by keypad button #1
*81* …[up to 11 digits]*
Programs the phone number called by keypad button #2
*89* …[up to 11 digits]*
Programs the phone number called by keypad button #3
*90* …[up to 11 digits]*
Programs the phone number called by keypad button #4
*91* …[up to 11 digits]*
Programs the phone number called by keypad button #5
*92* …[up to 11 digits]*
Programs the phone number called by keypad button #6
*93* …[up to 11 digits]*
Programs the phone number called by keypad button #7
*94* …[up to 11 digits]*
Programs the phone number called by keypad button #8
*95* …[up to 11 digits]*
Programs the phone number called by keypad button #9
To set the dialing speed, use the following codes:
*96*
51ms on/off dialing speed (default)
*97*
102ms on/off dialing speed
For other programming information, such as how to program for operation on a
PBX, timing codes, etc., see Section III (page 6).
B. Operation
If the phone has a red button, pressing it will automatically dial the pre-programmed
number and operate the auxiliary outputs if it is programmed to do so. On these
units, there is no backup number for the top button.
When the black call button is pushed, the user will hear a dial tone and can then
use buttons 0-9 on the-keypad to dial one of ten pre-programmed numbers. When
the called party answers, simply speak hands-free. When the called party hangs-
up the unit will automatically disconnect. To hang up the phone while it is active,
simply press the black button a second time. When the call is in progress, the
keypad is active for use with message systems, to enter a mailbox number, etc.
The black call button is used to take the phone off hook before placing a call with the keypad.
This button cannot be programmed with an autodial phone number and it cannot be used to
automatically activate an auxiliary output.
- ETP-402KV Keypad Emergency Phone ETP-402KSV Keypad Access Phone ETP-400 MOD Single Button OEM Emergency Phone ETP-402KSEV Keypad Access Phone ETP-402KSE Keypad Access Phone ETP-402KS Keypad Access Phone ETP-402K Keypad Emergency Phone ETP-402CV Dual Button Assistance / Information Phone ETP-402C Dual Button Assistance / Information Phone ETP-402 Dual Button Emergency / Information Phone ETP-401V Single Button Emergency Phone ETP-401P Swimming Pool Emergency Phone ETP-401CV Single Button Assistance Phone ETP-401C Single Button Assistance Phone ETP-401 Single Button Emergency Phone ETP-400V MOD2 Single Button OEM Emergency Phone ETP-400V MOD Single Button OEM Emergency Phone ETP-400V Single Button Emergency Phone ETP-400KV Keypad Emergency Phone ETP-400KSV Keypad Access Phone ETP-400KSEV Keypad Access Phone ETP-400KSE Keypad Access Phone ETP-400KS Keypad Access Phone ETP-400K Keypad Emergency Phone ETP-400H-NC Handset Emergency Phone ETP-400DV Dual Button Emergency / Information Phone ETP-400 Emergency Phone With One Button ETP-400DCV Dual Button Assistance / Information Phone ETP-400DC Dual Button Assistance / Information Phone ETP-400D Dual Button Emergency / Information Phone ETP-400CV Single Button Assistance Phone ETP-400C Single Button Assistance Phone ETP-400 MOD2 Single Button OEM Emergency Phone ETP-103V OEM Emergency Phone ETP-103 OEM Emergency Phone ETP-100MV Surface Mount Emergency Phone ETP-100MBV Surface Mount Emergency Phone ETP-100MB Surface Mount Emergency Phone ETP-100M Surface Mount Emergency Phone ETP-100EV Flush Mount Emergency Phone ETP-100EBV Flush Mount Emergency Phone ETP-100EB Flush Mount Emergency Phone ETP-100E Flush Mount Emergency Phone