Vernier EasyData Guidebook - Manual (Page 66)

EasyData Guidebook 65
Message Description
The sample interval or # of samples entered is not
supported by the current hardware/software
combination. The closest, acceptable value has been
substituted.
Either the connected data collection device or
calculator is running low on batteries. It is
recommended that the batteries be replaced.
Select to ignore this warning and continue. A
loss of data may result.
Select to exit EasyData. Replace the batteries
before restarting EasyData.
There is less than 5000 bytes of free RAM available to
store data.
Select to proceed with data collection and run
the risk of not collecting all requested data points.
Select to return to the main screen. Select
to exit EasyData and free up more RAM.
The calculator and connected data-collection device
do not share a remote data collection configuration.
When remote or long-term data collection is started,
EasyData assigns a unique ID to both devices. Only
the calculator and data-collection device that share the
same ID can be used to retrieve the data.
Select to ignore the collected data and continue.
Collected data will be erased.
Select to quit EasyData. Connect the calculator
to the correct data-collection device and restart
EasyData.
The sensor currently connected consumes battery
power at a higher rate than most sensors.