Vernier EasyData Guidebook - Manual (Page 60)

EasyData Guidebook 59
Appendix B: Error Messages
The table below has been included to provide a helpful explanation of the error
messages that may be encountered while using EasyData.
Message Description
The calculator batteries are too low to safely run
EasyData.
Select to return to the home screen. Replace the
batteries before starting the EasyData app again.
The application failed in attempting to communicate
with the connected data-collection device.
Make sure all cables are properly connected and the
data-collection device has power.
Selecting will exit EasyData. Selecting will
erase all settings, data, and search for an interface.
The default or requested plot cannot be shown
because one or more of the lists involved is empty or
the lists involved are of different lengths. All involved
lists must contain at least a single data point and be of
the same length.
Collect some data, fill the lists with data outside of
EasyData, or load data from a saved experiment.
The calculator could not establish a valid connection
to a data-collection device.
Make sure all cables are properly connected and the
data-collection device has power, then select
.
Selecting will exit EasyData. Selecting
will start the application with no interface connected.