Vernier EasyData Guidebook - Manual (Page 56)

EasyData Guidebook 55
Manual Triggering
In manual triggering, data collection starts when the Start/Stop or Trigger button on the
data-collection device (LabPro, CBL 2, CBR, or CBR 2) is pressed. Follow these steps to
set up for manual trigger.
1. From the EasyData main screen, select , and
then select Time Graph...
2. The current Time Graph settings are displayed. Select
.
3. The Select Trigger Type screen is displayed. Choose
Manual and select
.
4. The updated Time Graph Settings are displayed. Select
to return to the main screen.
5.
EasyData is now set for triggering. Select and
follow the on-screen instructions when you are ready to
start data collection.