5 resetting the y‐cam to factory defau, 6 third party software, 7 alternative methods of accessing th – Y-cam Classic Range User Manual

Page 62: Esetting the, Cam to, Actory, Efaults, Hird, Arty, Oftware

Page 62

7.5 Resetting the Y‐cam to Factory Defaults

There are two ways to reset the Y‐cam back to its factory defaults:

1. Press the Reset button on the side of the camera through the pin hole.

2. Through the Camera Settings / Tools Menu under the heading “Backup or Reset”

7.6 Third Party Software

Y‐cam is supported by number of security software. Some of them are listed below. However you are advised to visit

http://www.y‐cam.com

periodically for the updated list.

Icatcher

http://www.icode.co.uk

Luxriot

http://www.luxriot.com/

Verified Alarm

http://www.initsys.co.uk

BlueIris

http://www.blueirissoftware.com

Security Spy

http://www.securityspy.com

Camvista

http://www.camvista.co.uk

Nuuo NVR IP+

http://www.nuuo.com

Eyesoft

http://www.bikal.co.uk

NetcamWatcher

http://www.netcam‐watcher.com

Nuuo NVR (IP+)

http://www.nuuo.com/product.php?id=12

Any software that supports generic MJPEG cameras should work with Y‐cam IP cameras.

In order to use the Y‐cams with software that supports adding a generic MJPEG camera, please use the path of your
camera with “/stream.jpg” on the end of it. This will instruct the software to extract the Motion JPEG video stream from
the specified path in the Y‐cam. All current Y‐cam models support this method.

7.7 Alternative methods of accessing the video stream

You can also access video/images from the network camera in the following ways:

• Motion JPEG server push (if supported by the client, Firefox, for example). This option maintains an open HTTP

connection to the browser and sends data as and when required, for as long as required. Enter the path ‐
http:///stream.jpg

• Still JPEG images in a browser. Enter the path ‐ http:///snapshot.jpg
• MJPEG via RTSP: rtsp:///live_mjpeg.sdp
• MPEG4 via RTSP: rtsp:///live_mpeg4.sdp

RTSP MPEG4 stream:

rtsp://10.10.10.133/live_mpeg4.sdp

RTSP MJPEG stream:

rtsp://10.10.10.133/live_mjpeg.sdp

HTTP MPEG4 stream:

http://10.10.10.133:8009/stream.av

HTTP MJPEG stream:

http://10.10.10.133:8009/stream.jpg

HTTP snapshot image:

http://10.10.10.133:8009/snapshot.jpg

For further details please click on the links in the “Stream Setup” page of the camera settings by the name of “Primary
Stream”, “Secondary Stream” and “Mobile Stream”.